Technical Knowledge Base

CLI Commands

Login: shellUsr
PW: wy3oo&w4
fcDump (watchdogSuspend)
moduleShow shows which module's are installed and running ex. Debug
getConsoleOutput display console messages
dqprint (watchdogSuspend)
dqflush flushes the trace
dqlist displays trace's on the controller
moduleshow listing of active processes
loadDebug load debug process --> neccessary to execute _MT commands
unloadDebug end Debug proces
chall Host-and drive side channel information
luall Logical Unit information
iditnall Initiator Driver I_T nexus information
tditnall Targer Driver I_T nexus information
tt "tRAID" SOD-checkcommand. If entry "task not found" is displayed Controller bootup is complete
i Task Trace Summary
I detailed View of Trace Summary (watchdogSuspend)
lockMgrShow Controller-Lock display
netCfgShow show Network information
netCfgSet change network information
netstat "-a" show network statistics
evfShowOwnership Listing of Controller-Volume-Ownership
cmgrShow Controller-Status
lemClearLockdown solve Controller-Lockdown (reboot-chain)
clearHardwareLockdown clear hardware lockdown
psvClearSodRebootLoopCounter clear reboot counter
setControllerServiceMode_MT 1 set alternative controller into service mode (Debug)
cmgrSetAltToServiceMode set alternative controller into service mode
setControllerToFailed_MT 1 fail Alternative Controller  (Debug)
cmgrSetAltToFailed fail Alternative Controller
setControllerToOptimal_MT 1 set Alternative Controller to status optimal (Debug)
cmgrSetAltToOptimal set Alternative Controller to status optimal
reboot reboot (short reboot without POST)
sysReboot reboot (with POST)
resetController_MT 1 reset alternative Controller (Debug)
altCtlReset 2 reset alternative Controller
samRebootBoards reboot both controllers at the same time
excLogShow Logfile that lists unexpected reboots
vdmShowTriveTrays list disc-informations
vdmShowDriveList list disc-informations
vdmShowDriveDevnum list details for a single drive
dsmShow check drive compability (lock for LO# differences)
setDriveToFailed_MT fail a disk (Debug)
setDriveToOptimal_MT set a disk to optimal (Debug)
startDriveReconstruction_MT set a disk to optimal and start copy back (Debug)
vdmShowVGInfo show volume infos
vdmDrmShowMgr show hotspare informations
vdmShowDriveList show drives
vdmShowRAIDVolList show RAID-Group infos
evfShowVol show volume infos (detailed view of single or all volumes)
sasShowAllPhyErrs show SAS PHY Error statistics
clearAllPhyErrStats reset SAS PHY Error statistics
vdmShowOosPieces list drive failures with timestamp
vdmShowRVoosPieces list failures at volumes with timestamp
sobs "class=CrushDrive" list failures at Dynamic disk pools
bdbmClearPrimaryDatabase delete database-config at FW>7.83
isp dsmWipe, 0x delete DAC Store of a single Disk (usuable of e.g. a Disk is not compatible or has been used in another shelf before)
sysWipe delete database-config at FW<7.83